Fiber/E1 Media Converter

E1 to Fiber Media Converter Converter

Key Features

- Maximum 8 ports of E1 multiplex in 1 fiber optic cable
- Very long distance with 25km fiber optic cable length.
- Use only single fiberoptic cable for Full-Duplex communication with WDM.
- Compliant with many communication standard.

Technical Specification

- E1 line coding : HDB3 (AMI is optional)
- E1 line impedance : 120ohm (75ohm optional)
- E1 data rate : 2.048MHz
- E1 connectors : RJ-45
- E1 receive sensitivity : 0dB to -43dB
- E1 Maximum cable length : cables 0.63mm (22AWG) up to 2.5km. (Optional for special request)
- E1 Standards : ANSI T1.403-1999, ANSI T1.408, AT&T TR 62411, ITU G.703, G.704, G.706, G.736, G.775, G.823, I.431, O.151, O.161, ETSI ETS 300 166, JTG.703, JTI.431, JJ-20.1, TBR12, TBR13, and CTR4.- Fiber optic cable : Single mode
- Fiber optic connector : SC (other type is optional)
- Fiber optic wave length : 1310nm/1550nm WDM
- Fiber optic maximum cable length : 25km (40km, 60km, 80km optional)
- Fiber optic standards : ITU-T G.957, G.958

- Power Requirement : 500mA +5VDc

-Size  W70mm X H25mm X L95mm


Model
- MC-1E-S25S-A   Media Convert 1E1, Single Mode, 25 km, SC Connecter, A-1310 nm
- MC-1E-S25S-B   Media Convert 1E1, Single Mode, 25 km, SC Connecter, B-1550 nm
- MC-1E-S25F-A   Media Convert 1E1, Single Mode, 25 km, FC Connecter, A-1310 nm
- MC-1E-S25F-B   Media Convert 1E1, Single Mode, 25 km, FC Connecter, B-1550 nm